Видео

I sanded mine flat and it works as good as any other whetstone. The burr on the edge of the stone seemed to ruin the blade as i was using it. I also noticed that you can actually feel the difference in grit once you take the top layer off. The lighter half is substantially finer than the course side and is a nice, smoother solid finish to it like a quality whetstone. So it costs $3 and 2-3 hours of your time to get an awesome stone.

Which side is the fine side ? Both sides feel the same to me 🤷🏾‍♂️

Awesome. I like that these will store up somewhere easily. Light enough to hang somewhere. I use a pair of saw benches in my shop, and sometimes my living room. Seeing you sawing made me think the order of operations could have been a simply 2x4 sawbench made with laminated top and mortised legs and stretcher. Basically a mini 2x4 bench. But you got the sawing done…. 4 minutes later I saw you using a sawbench in the shape you video!

If I understand the layout, furnace has a path wide enough to walk around the back of the shelf? The shelf is on the wider side of the furnace and allows for big shelves instead of narrow shelves making the pathways narrow.

I disagree you can tell the difference in grit by feeling it. At least for me I feel the difference between medium

THANKYOU!

Salt causes rust, but the chemical reaction of combining vinegar and salt produces hydrochloric acid, which removes the rust.

drop in a bucket of used motor oil for a few minutes

Virgin olive oil will protect from rust. It also makes old rusty items look great. The tiniest amount is needed. Olive oil is also edible of course so not a worry if you get it on your skin.

Thank you very much from those who didn't have fathers or mothers who taught them this. Probably dumb question but will this rule of thumb also work for bolts (no sharp point). Thanks!

Good for hatcjes and machetes

Zzzzzzzzzzzzzzzzz

I have a out side lamp pole and it has a lot of rust on the top. How can I cleans , soak it with vinegar and salt. Any tips.

Bro, I laughed so hard at the cleaning solution being just yogurt joke 😂

Darn I just bought this 😢. Thanks for your advice. I bought a piece of junk 😂

謝謝分享，我在今天也買了一組一樣的鋸片，是全新的商品並立刻拆封檢查，發現它的鎢鋼刀片大約總共有10個不同程度的破損，便宜貨確實需要考驗買家的運氣。

My Aldi doesn't have fun stuff like that. The cheap ones are made by a couple of companies at most. Some get different graphics. I had one that was a Mitiyoma copy. Not a bad thing, I don't like the small numbers after the first digit.

Thank you I’m in the middle of a project and needed this tip badly! I subscribed!

This is exactly what I needed for my workbench project! Thank you. New sub!

super helpful! thank you!

Turnings

Hahaha! True…thank you for your tutorial

I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great ruclips.net/user/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.

I have clean the silver plated trumpet using a solution of vinegar salt and then wrapping it in tin foil. Worked great.

I watched your video on touring Frank Lloyd Wright's property and saw at the end that you do woodworking. I looked at your channel page and see that this 4 year old video is the last one you made. I hope you are healthy, and everything is well with you.

Thank you for this - I have an old Craftsman copy and you’re probably the only creator I’ve seen do a tutorial on aligning the fence using the bolts on the underside of the fence. I’m going to check and see if mine has those

Why not drill pilot holes while in the vise

great idea

i need to drill perfectly straight holes into a wood floor with metal cross members underneath the wood its for a trailer...somewhat helpful

That's not rust lol

I got my relic rusty M35 WW2 German helmet(sorry) soaking in vinegar & salt right now! Just hope it don't hurt the partial decal that's still on it🤔

Rinse it then put it in a hot oven To evap any water then oil it or paint it

I respect anyone who eschews modern machines for hand tools I love anyone who also walks everywhere they go instead of using a motor vehicle And if they live in a log cabin without electricity, they are perfect!

I would pay you to build me one, would you be willing to do that?

The batteries in these are made really well. I have one that has held a charge for over 5 years, and has as much charge as the day it was put up. The fact that all the bits are in one place is the best selling point, you don't have to go hunt for what you need; just be careful they don't fall out. I wish I could find the charger lol.

Great information thanks for posting.

Which paint did you use?

That Stone Ain't Right

The lock was most likely Zinc so I am sure the Vinegar did a number on it, next time you can try the same mixture along with Electrolysis. As many stated wash with soap & water with a little baking soda to naturized the aid of the Vinegar. To stop further rusting there are three thing you can do, spray clear coat it, cold blue it or wipe it down with oil.

Thank you so much for this!

soapy water works as lube

Very good instructions!

Good video Bad stone

So which side is which. I have 2 of the HF ones, but I don't know which side is which

I bet 100,000 dollars that combo square is not square.

I thought he was going to make a joke when he opened that bag that it turned into a roasted chicken. Still funny. Good video. Thanks

I have the Irwin clamps, bought the harbor freight ones for spreading I need sometime , they have a life time warranty on them

Why not use aluminum?

Why does it have to be a piece of sandpaper ?

I have seen two ways to kinda fix these. Open the handle cover and bend the rear metal tab so it will take a deeper bite. The other way that can help is to get rough sand paper and sand the top and bottom of the rail. It helps it grab a little better.